This is the ultimate guide for new beginners to buy Cat6a Cable
In this comprehensive guide, I’ll cover: (This is a complete guide to Cat6a cable)
- What is the cat6a cable used for?
- Is cat6a cable shielded?
- What is the difference between cat6 and cat6a cable?
- How far can cat6a cable run?
- Which cat6a cable is best?
So if you want to buy the right and best Cat6a cable, you should get a lot of value from today’s guide.
What is the cat6a cable used for?
The transmission frequency is 200 ~ 250 MHz, and the maximum transmission speed can also reach 1000 Mbps. It mainly uses in gigabit networks. Category 6A cable is an improving version of Category 6 cable, which is also an unshielded twist pair cable specified in ANSI/EIA/TIA-568B.2 and ISO Category 6 / E standards. it has a great improvement in crosstalk, attenuation, and signal-to-noise ratio.
Is cat6a cable shielded?
There are two kinds of type Cat6. Generally speaking, the diameter of a single bare copper wire is 23AWG, which is about 0.573 mm. There are also Cat6 wires of 24AWG, with a thickness of about 0.511 mm.
CAT6 Cable
Cat6 refers to Category 6 twisted pair, including shielded twisted pair (STP) and unshielded twisted pair (UTP). The Category 6 of twisted pairs is different from the Cat 5 or Cat 5A types of twisted pairs in appearance and structure. it not only increases the insulated cross skeleton, but also places the four pairs of twisted pairs in the four grooves of the cross frame, and the diameter of the cable is also thicker. At the same time, the parameters of the Cat 6 types of twist pair have been improving greatly , and the transmission frequency extends to 250MHz or higher. Cat6 mainly uses for data transmission between switches, routers and computer jacks.
CAT6A Cable
Cat6A refers to super Category 6 twisted pair, which can still operate normally above 40 ℃. In order to be different from the ordinary Category 6 cabling system, this kind of cabling whose bandwidth performance is much higher than Category 6 calls Super Category 6. Super Category 6 twisted pair includes super Category 6 unshielded twisted pair and super Category 6 shielded twisted pair. On the basis of the existing six types of twist pairs, some performance parameters such as near-end crosstalk, attenuation crosstalk ratio, and echo loss improve
What is the difference between cat6 and cat6a cable?
The performance of Cat6A is higher than that of Cat6, which mainly reflects in three aspects:
1. The transmission frequency of Cat6A reaches 500MHz, which is twice as high as that of Category 6 lines. It mainly uses 10G (10G) networks with the appearance marked "CAT.6A". In addition, the super Category 6 network wires support 10G Ethernet, which will have a similar logo of 10Gigabit in appearance. The wire core strands of 250MHz
2. Category 6 network wires required by Cat6 are much denser and the conductors are thicker.
3. Cat6A defines a higher bandwidth and relatively carries more information, so the parameters of Cat6A network cable are more stringent than Cat6.
How far can it run?
The transmission of the network is actually the transmission of the network signal on the twisted pair. As an electronic signal, when it transmits in the twists pair, it bound to affect by resistance and capacitance, which leads to the attenuation and distortion of the network signal. When the attenuation or distortion of the signal reaches a certain degree, it will affect the effective and stable transmission of the signal. Therefore, the twisted pair has a transmission distance limit, generally speaking, no more than 100 meters.
Now it's your turn to do something, do you have any other good idea to share us me, welcome to discuss with our team.
Or could read the following related topics
A learning guide of the network cabinet that a green hand must read