Representative series photos. Cabinet height, dimensions and supplied configuration vary by SKU; use the specifications on this page for the selected model.
BLWM-6409
Place a compact 19-inch enclosure at the network point without taking floor space.
Check the fit before you specify.
This configuration combines 9U of rack space with a 600 × 450 mm footprint and a glass front door. Use the dimensions below to compare it with your equipment schedule and installation space.
| SKU | BLWM-6409 |
|---|---|
| Rack height | 9U |
| Width | 600 mm |
| Depth | 450 mm |
| Overall height | 500 mm |
| Front door | Glass |
| Cabinet format | Single-section wall-mount cabinet |
| Static load options | 40 or 60 kg, by structure |
Details that shape installation and access.
19-inch mounting
Install rack equipment in the welded-frame, single-section 19-inch cabinet.
Service access
Open the glass front door and remove side panels when access is needed.
Cable routing
Route cables through knock-out points in the top or bottom panel.
Choose the construction for your load.
Select the wall-cabinet structure to match the required static load. BOLEIN offers 40 kg and 60 kg versions. The current BLWM single- and double-section data sheets describe the 60 kg version; confirm the selected construction in the quotation.
| 60 kg version | 1.5 mm U-marked mounting profiles; 1.2 mm top, bottom and wall-mount components; 1.0 mm front door, crossbars and rear panel; 0.8 mm side panels |
|---|---|
| 40 kg version | 1.5 mm square-hole mounting profiles; other sheet-metal parts 0.8 mm |
| Material and finish | SPCC cold-rolled steel, powder coated; black RAL 9004 or grey RAL 7035 in the data sheet |
| Protection rating | IP20 in the current BLWM data sheet |
Use the installation drawing to select wall fixings and to verify the wall’s suitability for the fully loaded cabinet.
Choose the finish around the glass door.
Several decorative strip colours are available for the sides of the wall-cabinet glass door. Share the desired colour with the SKU so it can be confirmed in the order specification.
Choose the matching assembly guide.
The 40 kg and 60 kg wall-cabinet structures use different assembly instructions. Select the guide for the structure confirmed in your order.
Make the configuration work on site.
- Check equipment depth and cable bend space against the stated cabinet depth.
- Confirm the wall position, fixing method and front-door clearance before ordering.
- List any shelves, rails, PDU or cable-management accessories in the enquiry so their fit and supply can be confirmed.
For a drawing or a detailed quotation, send the SKU, quantity, equipment list and accessory requirements.
Nearby configurations.
If rack height or footprint needs to change, compare these models in the same cabinet range.
Specify BLWM-6409 for your project.
Send the model, required quantity and any accessories or drawing requirements. We will confirm the final configuration and commercial details with you.
Contact BOLEIN →