Choose the cabinet around your equipment.
Explore BOLEIN floor-standing cabinets by rack height, footprint and door type. Compare glass and mesh fronts, then share your model list and installation needs for a quotation.
One cabinet family, many installation plans.
The listed BLFS models cover 600 and 800 mm widths with 600, 800 and 1000 mm depths in selected combinations. Rack heights run from 9U to 47U. Choose a model from the schedule below, then confirm the construction and accessories for your order.
For network rooms, equipment rows and distribution spaces, allow for equipment depth, cable bends, front and rear service access, power and the room’s cooling design.
Browse every cabinet SKU →
Representative series photo. The supplied door, dimensions and accessories depend on the selected SKU and quotation.
Visibility or ventilation starts at the door.
Select the front door to match the equipment and airflow plan. We will confirm the available door construction for the model you specify.
Glass front door
See the equipment inside while the door is closed. Check the room’s ventilation and cooling requirements when choosing a glass front.
View a 42U glass-door model →
Ventilated mesh front door
The standard mesh door has a 71% ventilation rate. Ask by email about an 80% option if your airflow plan requires more open area; availability is confirmed for the quoted configuration.
- Single-leaf or double-leaf opening
- Flat or curved mesh profile
Start with rack height and footprint.
These examples show real combinations in the listed BLFS range. The full model list contains 66 glass- and mesh-door SKUs; the exact width and depth combinations vary by rack height.
| Rack height | Example footprint | Glass door | Mesh door |
|---|---|---|---|
| 9U | 600 × 600 mm | BLFS-6609GSA | BLFS-6609-VTA |
| 22U | 600 × 800 mm | BLFS-6822GSA | BLFS-6822-VTA |
| 32U | 800 × 1000 mm | BLFS-8132GSA | BLFS-8132-VTA |
| 42U | 600 × 600 mm | BLFS-6642GSA | BLFS-6642-VTA |
| 47U | 800 × 1000 mm | BLFS-8147GSA | BLFS-8147-VTA |
Dimensions shown are width × depth. Open each model for its individual specifications; confirm final dimensions and configuration in the quotation.
Filter all 66 floor-standing models →Need a segmented cabinet?
BOLEIN can custom-make two-section and three-section floor-standing cabinets. Share a sketch or the required layout, dimensions and access points so the configuration can be reviewed.
Discuss a custom cabinet ↗Separate access within one cabinet.
A two-section cabinet gives two equipment groups their own installation space within a single floor-standing enclosure. Separate lockable doors let you open one section for service while the other stays closed.
Plan the rack space for each section around the equipment it will hold. BOLEIN can review the divider, mounting rails, cable entry and front and rear access against your layout before confirming a custom build.
The cabinet shown below has a flat mesh door on one side and a curved mesh door on the opposite side. Both views show the same two-section cabinet.
Flat mesh door side
Separate lockable access to the upper and lower sections.
Curved mesh door side
The opposite side of this same cabinet.
Inside the cabinet
Divider and mounting rails shown with both sections open.
Studio-style visualizations based on the supplied factory photos. Confirm the final dimensions, compartment layout and door arrangement with your project drawing.
Send your two-section cabinet requirements →Send the details that determine fit.
A model number is a useful start. Add the equipment and installation requirements so the door, mounting, cable entry and accessory scope can be checked together.
- Rack space and footprintRequired U height, width, depth and available room clearance.
- Door and airflowGlass or mesh; for mesh, single or double opening, flat or curved profile, and any 80% ventilation request.
- Access and accessoriesService sides, shelves, rails, PDU, cable routing, feet or castors.
- Commercial detailsSKU or model list, quantities, delivery location and any drawing or packing needs.
Representative series image showing cabinet frame and removable panels.
Common configuration questions.
Can I choose glass or mesh doors?
Yes. Listed BLFS models include GSA glass-door and VTA mesh-door versions. Confirm the chosen door against the specific SKU.
Which mesh-door options are available?
Mesh doors may be single- or double-leaf, with a flat or curved profile. Standard ventilation is 71%; ask about an 80% option for higher airflow needs.
Are two- or three-section cabinets possible?
Yes, these can be custom-made. Send the desired layout and dimensions so we can review the design for your project.
Can the cabinet ship flat packed?
Flat-pack shipment is available. Request the final packing method, package dimensions and assembly details with the quotation.
Tell us which cabinets you need.
Send the SKU or required size, door choice, quantity and any accessories or custom structure. You can also email info@rackspro.com.